1、 Considerations

1. Measure the length of the charging area;

2. Other vehicles can enter and exit normally from the measuring position of parking space;

3. Determine the location of the distribution box and the distance between power lines;

4. Confirm whether there is moisture seepage in the underground garage;

5. Determine whether the light is sufficient;

6. Test whether the signal of the underground garage is stable.

Chengkai Electric Charging Pile

2、 Install the charging pile and plan the socket distance in advance

Before installing the charging pile, confirm the road number specification of the charging pile. Take the 16 Luyun E-Charge intelligent charging station, which is well sold in the market at present, for example, the spacing between each socket should be 80~100cm to ensure the smooth access of charging vehicles.

Make marks in advance when installing sockets, and set different charging line lengths according to the distance between sockets.

3、 Ask a professional electrician to connect the power cord

When connecting the power cord, it must be operated by a professional with an electrician certificate. Before this, it is necessary to ensure that the charging pile has been correctly connected to the neutral and ground wires, and the equipment is equipped with an air switch.

After confirming the safety, power on again to test whether the charging pile operates normally.

4、 Check signal strength

As the underground garage cannot be compared with the ground, it is necessary to check whether the signal strength meets the standard.